FLIR A615
Support Center

FLIR A615

Go to Product Details Page

For Support
Please submit a ticket.

For Service
Call 1-866-354-7911 or submit RMA.

Overview:
Instructions

VLC Media Player - Display and Record

Learn more
Warranty & RMA

2-10 Thermal Camera Warranty from FLIR

Learn more
Instructions

What is the digital I/O connector intended for, and how does it work?

Read the Story
Configuration

My Ethernet camera (FLIR A3x0/A3x5/A6x5/Ax5) in FLIR Tools does not display a live image but instead shows a rainbow-colored image. How do I fix this?

Read the Story
Technical Guidance

How does the vertical sync frequency vary with the requested frame rate of the FLIR A615/A655?

Read the Story
Technical Guidance

How can I stream video from my USB or Ethernet camera?

Learn more
Trouble Shooting

The temperature readout from my camera is not realistic in FLIR Tools/ResearchIR. How do I correct this?

Read the Story
Instructions

Does FLIR offer an SDK to control and get video stream from the FLIR IR cameras?

Learn more
Registration

I'm trying to register my FLIR product but I recieve an error that the serial number is not found. What is the reason?

Read the Story
Compatibility

Which FLIR cameras are supported by the Atlas SDK?

Read the Story
System Requirements

At what speed do we measure with the A-series cameras? ex. How fast could I detect a change in temperature and set a digital alarm?

Learn more
Technical Guidance

How can I connect my FLIR Ethernet camera to FLIR Tools?

Read the Story
Resources:
Automation Catalog
Download
FLIR A315/A615 Datasheet
Download
FLIR International Uncooled Thermal Camera 2-10 Limited Warranty
Download
Specifications
Overview
Housing material
Aluminium
IR Resolution
640 × 480 pixels
Contents
Hard transport case or cardboard box, Thermal imaging camera with lens, Utility CD-ROM, Calibration certificate, Ethernet™ cable, USB cable (FLIR A615), Mains cable, Power cable (pig-tailed), Power supply, Printed Getting Started Guide, Printed Important Information Guide, User documentation CD-ROM, Warranty extension card or Registration card, 6-pole screw terminal (mounted on camera)
Connections & Communications
Digital I/O connector type
6-pole jackable screw terminal
Digital I/O isolation voltage
500 VRMS
Digital I/O supply voltage
12/24 VDC, max 200 mA
Digital input purpose
Image tag (start, stop, general), Image flow ctrl. (Stream on/off), Input ext. device (programmatically read)
Digital Inputs
2 opto-isolated, 10–30 VDC
Digital Output Purpose
Output to ext. device (programmatically set)
Digital Outputs
2 opto-isolated, 10–30 VDC, max 100 mA
Ethernet
Control and image
Ethernet Communication
TCP/IP socket-based FLIR proprietary and GenICam protocol
Ethernet Connector Type
RJ-45
Ethernet Image Streaming
16-bit 640 × 480 pixels at 50 Hz, 16-bit 640 × 240 pixels at 100 Hz, 16-bit 640 × 120 pixels at 200 Hz (Signal linear, Temperature linear, Radiometric GigE Vision and GenICam compatible)
Ethernet Protocols
TCP, UDP, SNTP, RTSP, RTP, HTTP, ICMP, IGMP, ftp, SMTP, SMB (CIFS), DHCP, MDNS (Bonjour), uPnP
Ethernet Standard
IEEE 802.3
Ethernet Type
Gigabit Ethernet
USB
Control and image
USB - Communication
TCP/IP socket-based FLIR proprietary
USB - Connector Type
USB Mini-B
USB - Image Streaming
16-bit 640 × 480
USB - Protocols
TCP, UDP, SNTP, RTSP, RTP, HTTP, ICMP, IGMP, ftp, SMTP, SMB (CIFS), DHCP, MDNS (Bonjour), uPnP
USB - Standard
USB 2 HS
Environmental
Atmospheric transmission correction
Automatic, based on inputs for distance, atmospheric temperature and relative humidity
EMC
EN 61000-6-2:2001 (Immunity), EN 61000-6-3:2001 (Emission), FCC 47 CFR Part 15 Class B (Emission)
Emissivity Correction
Variable from 0.01 to 1.0
Encapsulation
IP 30 (IEC 60529)
Humidity (Operating and Storage)
IEC 60068-2-30/24 h 95% relative humidity +25°C to +40°C (77 to 104°F)
Operating Temperature Range
–15°C to +50°C (+5°F to +122°F)
Shock
25 g (IEC 60068-2-27)
Storage Temperature Range
–40°C to +70°C (-40 to 158°F)
Vibration
2 g (IEC 60068-2-6)
Imaging & Optical
Camera size excl lens (L x W x H)
203 × 73 × 75 mm (8.0 × 2.9 × 3.0 in.)
Detector Pitch
17 µm
Detector Time Constant
Typical 8 ms
f-number
1.0
Focus
Automatic or manual (built in motor)
Image Frequency
50 Hz (100/200 Hz with windowing)
Lens Identification
Automatic
Measurement & Analysis
Accuracy
±2°C or ±2% of reading
External Optics & Windows Correction
Automatic, based on input of optics/window transmission and temperature
Measurement Corrections
Global object parameters
Object Temperature Range
-20 to +150°C +100 to +650°C +300 to +2000°C
Optics Transmission Correction
Automatic, based on signals from internal sensors
Reflected apparent temperature correction
Automatic, based on input of reflected temperature
Thermal Sensitivity/NETD
< 0.05°C @ +30°C (86°F) / 50 mK
Power
External Power Connector Type
2-pole jackable screw terminal
External Power Operation
12/24 VDC, 24 W absolute max
Voltage
Allowed range 10–30 VDC