Discontinued

Extech MO270

Wireless Pin/Pinless Moisture Meter

The Extech MO270 is a Wireless Pin/Pinless Moisture Meter with detachable pin/pinless sensors that transmit data to the display, and can be viewed up to 20 m (65 ft) from the measurement point. Measurements are viewed on a full color graphical display. Readings from 8 remote sensors can be viewed on the display. The receiver can record data from 40 remote sensors simultaneously. Trending Mode displays a graphical representation of live readings for fast scanning of large areas. An included telescoping handle extends to 1.2 m (4 ft) for measurements in ceilings or in hard to reach areas (optional 3 m (9.8 ft) and 5 m (16.4 ft) handles available). Complete with 9 V battery, remote pin probe, replacement pins, protective cap, and pouch case.

Spécifications

Spécifications générales
Contenu en humidité WME (Pin) 6.0 to 99.9%
Fréquence de transmission sans fil 2.4GHz (pin/pinless sensor to display)
Portée de transmission sans fil 65ft (20m) unobstructed view
Précision de base du contenu en humidité WME (Pin) ±(5% of reading + 5 digits)
Résolution maximale de la teneur en humidité relative (sans Pin) 0.1
Résolution maximale du contenu en humidité WME (Pin) 0.10%
Teneur relative en humidité (sans Pin) 0 to 99.9 (relative)
Type de capteur Replaceable threaded contact pins (0.75"/22mm), non-penetrating electromagnetic sensor pad
Détails supplémentaires
Alimentation 3.7V rechargeable Li-Polymer battery
Certifications CE
Dimensions 8 × 2.3 × 1.7" (203 × 58.4 × 43.2mm)
Garantie 2 years
Poids 7.2oz (204g)

Resources & Support

User Manual

Manuel d’utilisation de la Extech MO270

Certification

Extech MO270 Declaration of Conformity

User Manual

Extech MO270 User Manual

Datasheet

Extech MO270 Datasheet

Export Restrictions

The information contained in this page pertains to products that may be subject to the International Traffic in Arms Regulations (ITAR) (22 C.F.R. Sections 120-130) or the Export Administration Regulations (EAR) (15 C.F.R. Sections 730-774) depending upon specifications for the final product; jurisdiction and classification will be provided upon request.