Discontinued

FLIR EST™ Kiosk

Skin Temperature Screening Solution

Quickly screen passengers, customers, or employees for signs of elevated skin temperature with this turnkey solution. The FLIR EST Kiosk combines the temperature measurement capabilities of a thermal imaging camera plus FLIR Screen-EST™ software with the convenience of a tablet display and floor stand. This kiosk sets up in minutes, offering fully automated, self-service screening that targets the inner canthus (corner of the eye) for accurate skin temperature measurement.

Faster, Easier Skin Temperature Screening
Ready to use right out of the box with pre-installed FLIR Screen-EST software, customizable instructions, and alert displays.
Automatically targets the inner canthus for fast, accurate screening.
Advanced factory calibration combined with relative measurement methodology ensures screening accuracy and avoids false-positives.

Specifiche

Highlighted
I/O digitale, tipo di connettore M12 12-pin A-coded, Male (shared with external power)
Uscita digitale Utilizzo As function of alarm, output to external device, for example when the screening alarm is triggered
Uscite digitali 3x opto-isolated, 0–30 V DC, max. 300 mA (derated to 200 mA at 60C); Solid state opto relay; 1x dedicated as Fault output (NC)
Codifica Video stream – H.264, MPEG4, or MJPEG; Radiometric stream – Compressed JPEG-LS, FLIR radiometric
Interfaccia Ethernet Wired, Wi-Fi
Wi-Fi (optional) RP-SMA, Female; Dipole antenna 2.4/5 GHz (gain: maximum 2 dBi); Peer to peer (ad hoc)‎ or infrastructure (network)‎
numero f 1.3
Frequenza immagine
Frequenza immagine 30 Hz
Risoluzione
Sensibilità termica/NETD <40 mK at 30°C (86°F)
Accuratezza ±0.3°C (±0.5°F) when used with FLIR Screen-EST™ software
Comunicazione e Memorizzazione dati
Codifica Video stream – H.264, MPEG4, or MJPEG; Radiometric stream – Compressed JPEG-LS, FLIR radiometric
Comunicazione Ethernet TCP/IP socket-based FLIR proprietary
Ethernet Control, result, image, and power
Ethernet standard IEEE 802.3
I/O digitale, tensione d'isolamento 500 VRMS
I/O digitale, tipo di connettore M12 12-pin A-coded, Male (shared with external power)
Interfaccia Ethernet Wired, Wi-Fi
Tipo connettore Ethernet M12 8-pin X-coded, Female; RP-SMA, Female
Tipo Ethernet 1000 Mbps
Uscita digitale Utilizzo As function of alarm, output to external device, for example when the screening alarm is triggered
Uscite digitali 3x opto-isolated, 0–30 V DC, max. 300 mA (derated to 200 mA at 60C); Solid state opto relay; 1x dedicated as Fault output (NC)
Wi-Fi (optional) RP-SMA, Female; Dipole antenna 2.4/5 GHz (gain: maximum 2 dBi); Peer to peer (ad hoc)‎ or infrastructure (network)‎
Dati ottici e immagine
Banda spettrale 7.5–14 µm
Campo visivo (FOV) 24° × 18°
Distanza minima di messa a fuoco 0.15 m (0.49 ft)
Focal Plane Array (FPA) Uncooled microbolometer
Formato pixel Video stream – YUV411; Radiometric stream – MONO 16
Frequenza immagine 30 Hz
Frequenza immagine
Identificazione ottica Automatic
Lunghezza focale 17 mm (0.67 in)
Messa a fuoco One-shot contrast, motorized, manual
Miglioramento del contrasto FSX® / Histogram equalization (IR only)
numero f 1.3
Pitch sensore 17 µm
Risoluzione IR 464 × 348
Risoluzione spaziale (IFOV) 0.90 mrad/pixel
Risoluzioni streaming Video stream 0 – 640 × 480 pixels; Video stream 1 – 1280 × 960 pixels; Radiometric stream – 464 × 348 pixels
Sensibilità termica/NETD <40 mK at 30°C (86°F)
Sorgente immagine Video stream 0 – visual / IR / MSX®; Video stream 1 – visual; Radiometric video stream – IR
Sovrimpressione Video stream 0 – With/Without; Video stream 1 – No
Video Streaming Bit rate set through camera web
Misurazioni e analisi
Accuratezza ±0.3°C (±0.5°F) when used with FLIR Screen-EST™ software
Range di temperature oggetto 15°C to 45°C (59°F to 113°F)
Generali
Dimensioni (L × P × A) 360 × 270 × 1300 mm (14 × 11 × 51.2 in)
La confezione comprende Camera, Surface® Pro7 tablet, tablet stand, cables (Europe, UK, US), screening position floor sticker (T131181), FLIR Screen-EST™ license card, printed documentation
Peso 8.3 kg (18 lb.)
Ambientali e Certificazioni
Garanzia http://www.flir.com/warranty/
Alimentazione
Alimentazione esterna 24/48 V DC 8 W max
Assorbimento 7.5 W at 24 V DC typical; 7.8 W at 48 V DC typical; 8.1 W at 48 V PoE typical
Connettore alimentazione Camera: M12 12-pin A-coded, Male (shared with Digital I/O)
Tensione esterna Allowed range 18–56 V DC
Interfaccia utente
Interfaccia web Yes

Resources & Support

Datasheet

EST Kiosk Datasheet A4

Datasheet

EST Kiosk Datasheet