채팅
오른쪽 하단 모서리에 있는 채팅 버블을 눌러 즉시 당사와 연결하십시오.
(상담원이 있는 경우)
FLIR A6750 SLS
Longwave Infrared Thermal Camera
Product Variations
The FLIR A6750 SLS longwave camera is the ideal choice for high-speed thermal events and fast moving targets. It offers extremely short integration times and windowed frame rates above 4,000 Hz, so you can freeze motion or achieve accurate temperature measurements on moving subjects. The 327,680 (640 x 512) pixel IR resolution and high sensitivity produce crisp imagery, well suited to electronics inspections, scientific research, and more.
Affordable, Flexible Solution For Lwir Thermal Analysis
FLIR A6750 SLS capture all pixels from a scene simultaneously in under 190 µs with full frame-rates of 125 Hz—both crucial to imaging fast-moving objects.
Gigabit Ethernet and analog video are simultaneously active yet independently controlled allowing greater flexibility for recording and display purposes.
Add custom cold filters for spectral detection to image through glass, measure the temperature of thin film plastics, and more.
Specifications
| Highlighted | |
|---|---|
| Resolution | 640 × 512 |
| Pixel Size [Square] | 15 µm |
| Spectral Range | 7.5 µm (lower), 10–11µm (upper) |
| Detector Type | Strained-Layer Superlattice |
| Camera f_number | A6751 SLS: f/2.5 A6753 SLS: f/4.0 |
| Dynamic Range | 14-bit |
| Frame Rate [Full Window] | Programmable; 0.0015 Hz to 125 Hz |
| Integration Time | 480 ns to ~full frame |
| Standard Temperature Range [with band matched optics] | -20°C to 350°C (-4°F to 662°F) |
| Optional Temperature Range [with band matched optics] | 250°C to 2000°C/482°F to 3632°F (ND1); 500°C to 3000°C/932°F to 5432°F (ND2) |
| Filter Holder [Warm] | Behind lens mount for standard 1 inch diameter filters |
| Focus | Manual |
| Imaging & Optical | |
|---|---|
| Available Lenses | 17 mm, 25 mm, 50 mm, 100 mm, 200 mm |
| Camera f_number | A6751 SLS: f/2.5 A6753 SLS: f/4.0 |
| Close_up Lenses_Microscopes | 1X |
| Detector Type | Strained-Layer Superlattice |
| Dynamic Range | 14-bit |
| Filter Holder [Warm] | Behind lens mount for standard 1 inch diameter filters |
| Focus | Manual |
| Frame Rate [Full Window] | Programmable; 0.0015 Hz to 125 Hz |
| Image Time Stamp | Yes |
| Integration Time | 480 ns to ~full frame |
| Lens Interface | FLIR FPO (4-tab bayonet) |
| NEI [Typical] | N/A |
| Noise Floor [Typical] | N/A |
| On Camera Image Storage | None |
| Operability | ≥98% (≥99% typical) |
| Overlay | Fixed configuration, can be turned off |
| Palette | Selectable 8-bit |
| Pixel Clock | 50 MHz |
| Pixel Size [Square] | 15 µm |
| Radiometric Data Streaming | Gigabit Ethernet (GigE Vision) |
| Readout Modes | Asynchronous integrate while read; asynchronous integrate then read |
| Readout Type | Snapshot |
| Resolution | 640 × 512 |
| Sensor Cooling | Closed-cycle rotary |
| Spectral Range | 7.5 µm (lower), 10–11µm (upper) |
| Standard Video | SDI |
| Standard Video Zoom | Automatic, variable |
| Subwindow Modes | Flexible windowing down to 16 × 4 (steps of 16 columns, 4 rows) |
| Thermal Sensitivity_NETD [typical] | ≤45 mK (≤40 mK typical) |
| Video Modes | SDI: 720p@50/59.9, 1080p@25/29.9 |
| Measurement & Analysis | |
|---|---|
| Accuracy | ≤100°C (≤212°F) ±2°C (±3.6°F) accuracy (±1°C/1.8°F typical), >100°C ±2% of reading (±1% typical) |
| Ambient Drift Compensation [with factory cal] | Yes |
| Automatic Gain Control | Manual, Linear, Plateau equalization, DDE |
| Optional Temperature Range [with band matched optics] | 250°C to 2000°C/482°F to 3632°F (ND1); 500°C to 3000°C/932°F to 5432°F (ND2) |
| Standard Temperature Range [with band matched optics] | -20°C to 350°C (-4°F to 662°F) |
| Communication & Data Storage | |
|---|---|
| Command and Control | GenICam (GigE), RS-232 |
| Synchronization Modes | Sync In, Sync Out |
| General | |
|---|---|
| Size [L x W x H ] w_o Lens | 226 × 102 × 109 mm (8.9 × 4.0 × 4.3 in.) |
| Weight [without lens] | 2.3 kg (5 lbs) |
| Power | |
|---|---|
| Power | 24 VDC (<24 W steady state) |
| Environmental & Certifications | |
|---|---|
| Mounting | 2 × ¼" -20 tapped holes, 1 × 3/8"-16 tapped hole, 4 × 10-24 tapped holes |
| Operating Temperature Range | -20°C to 50°C (-4°F to 122°F) |
Accessories
- FPO Bayonet Plug, 4-Tab FPO Bayonet (4142249)
- FLIR A67xx Camera Filter Holder, Behind The lens, 1" Diameter, 4-tab FPO Manual Bayonet (4205217)
- Extender Ring Set, 4 Rings 0.25", 0.50", 0.75", & 1.00", 4-Tab FPO Bayonet (4205079)
- FLIR Cooled Science X-Series + A-Series Camera Universal Lens Support (4210086)
- FLIR Cooled Science A-Series + X-Series Camera Power Connector (26399-000)
- 1x Microscope Protective Window - MWIR & LWIR (4206654-6)
Resources & Support
Phone Support
International Line:
(+1) 805 392 3775
Local Number:
(+1) 844 283 5471
서비스, 수리 및 교정
아메리카
서비스 센터 연락처 |
전화 |
서비스, 수리 또는 보정 요청 |
이메일 보내기 |
|---|---|---|---|
| 미국 |
수신자 부담 전화: (+1) 866 477 3687 현지: +1 603 881 5200 |
||
| Canada | 800 613 0507 | RMA 제출 | |
| 남미 및 중미 | 0800 878 2486 | ||
유럽 |
|||
| 벨기에 | +32 (0)56 363 041 | ||
| 에스토니아 | +3726063976 | ||
| 독일 | +49 (0)69 95 00 900 | ||
| 이탈리아 | +390294753491 | ||
| 스웨덴 | +46 (0)8 753 25 00 | ||
| 아랍에미리트연합 | +971 4 802 4999 | ||
| 영국 | +44 (0)1732 220 011 | ||
아시아 태평양 |
|||
| 호주 | +44 (0)1732 220 011 | ||
| 중국 | +44 (0) 1245 453 414 | ||
| 인도 델리 | +91 11 47212002 | ||
| 인도 파리다바드 | +91 (129) 431-5031/32 | ||
| 일본 | 81-3-6721-6648 | ||
| 싱가포르 | +65 8787 0884 | ||
| 대한민국 | 2015년 2월 5일 | ||
Export Restrictions
The information contained in this page pertains to products that may be subject to the International Traffic in Arms Regulations (ITAR) (22 C.F.R. Sections 120-130) or the Export Administration Regulations (EAR) (15 C.F.R. Sections 730-774) depending upon specifications for the final product; jurisdiction and classification will be provided upon request.