채팅
오른쪽 하단 모서리에 있는 채팅 버블을 눌러 즉시 당사와 연결하십시오.
(상담원이 있는 경우)
Discontinued
FLIR X6980™
High-Speed MWIR Science-Grade Camera
Product Variations
The FLIR X6980 is an extraordinarily fast midwave IR camera designed for scientists and engineers who need to capture high-speed imagery for accurate thermal analysis and custom radiometric measurements. This thermal imaging camera combines 640 × 512 resolution with blazing-fast frame rates, allowing researchers to record stop motion on fast-moving subjects or rapid temperature changes—whether in the lab or on the test range. With a four-position motorized filter wheel and support for FLIR motorized focus lenses, the X6980 will provide higher quality recordings, save time, and mitigate frustration in dynamic acquisition environments.
Record crisply-focused, full 640 × 512 resolution thermal images at up to 1004 Hz with very low noise
Save up to 26,000 frames of data directly to on-camera memory or up to 15 minutes to included 512 GB SSD
Stream thermal data directly to a computer to view, record, and analyze with FLIR Research Studio
사양
| Highlighted | |
|---|---|
| Resolution | 640 × 512 |
| Detector Pitch | 25 µm |
| Spectral Range | X6980 InSb, X6982 InSb: 1.5–5.0 µm X6981 InSb, X6983 InSb: 3.0–5.0 µm |
| Detector Type | FLIR indium antimonide (InSb) |
| Camera f_number | X6980 InSb, X6981 InSb: f/2.5 X6982 InSb, X6983 InSb: f/4.1 |
| Dynamic Range | 14-bit |
| NETD | 20 mK typical |
| Frame Rate [Full Window] | Programmable: 0.0015 Hz to 1004 Hz |
| Integration Time | Programmable: 270 ns to ~full frame |
| Standard Temperature Range [with band matched optics] | X6980 InSb, X6982 InSb: -20°C to 350°C (-4°F to 662°F) X6981 InSb, X6983 InSb: -20°C to 350°C (-4°F to 662°F), -10°C/14°F for microscopes |
| Optional Temperature Range [with band matched optics] | ND1: 45°C–600°C (113°F–1112°F) ND2: 250°C–2000°C (482°F–3632°F) ND3: 500°C–3000°C (932°F–5432°F) |
| Filtering | 4-Position motorized warm filter wheel, standard 1-inch filters, user swappable |
| Focus | Motorized (compatible w/manual) |
| Imaging & Optical | |
|---|---|
| Available Lenses | X6980 InSb, X6982 InSb: Manual (broadband): 25 mm, 50 mm, 100 mm
Motorized (broadband): None X6981 InSb, X6983 InSb: Manual (3–5 µm): 17 mm, 25 mm, 50 mm, 100 mm, 200 mm Motorized (3–5 µm): 17 mm, 25 mm, 50 mm, 100 mm, 200 mm |
| Camera f_number | X6980 InSb, X6981 InSb: f/2.5 X6982 InSb, X6983 InSb: f/4.1 |
| Close_up Lenses_Microscopes | X6980 InSb, X6982 InSb: No broadband microscopes available X6981 InSb: 1x, 3x, 50mm close focus X6983 InSb: 1x, 3x, 1x20 cm long working distance (LWD), 50 mm close focus |
| Detector Pitch | 25 µm |
| Detector Type | FLIR indium antimonide (InSb) |
| Digital Zoom | 1x, Auto (best fit) |
| Direct to SSD Recording | Yes, removable 512 GB SSD included |
| Download of On_Camera RAM, SSD Recordings | Transfer from SSD through GigE, CXP, or CL to Research Studio v2.1 or higher |
| Dynamic Range | 14-bit |
| Filtering | 4-Position motorized warm filter wheel, standard 1-inch filters, user swappable |
| Focus | Motorized (compatible w/manual) |
| Frame Rate [Full Window] | Programmable: 0.0015 Hz to 1004 Hz |
| Image Time Stamp | Internal IRIG-B decoder clock TSPI accurate time stamp |
| Integration Time | Programmable: 270 ns to ~full frame |
| Lens Interface | FLIR FPO-M (4-tab bayonet, motorized) |
| NETD | 20 mK typical |
| On Camera Image Storage | RAM (volatile): 16 GB, up to 26,000 frames full frame SSD (user-removable/non-volatile): ~15 minutes of ~800 Hz recording with included 512 GB SSD (more than 2 hours possible with 4 TB SSD purchased separately) |
| Operability | >99.95% typical |
| Overlay | Customizable (Ability to toggle off) |
| Palette | Selectable 8-bit |
| Pixel Clock | 355 MHz |
| Radiometric Data Streaming | Simultaneous Gigabit Ethernet (GigE Vision), Camera Link,CoaXPress® 1.1, dual 5 Gb links |
| Readout Modes | Asynchronous integrate while read, Asynchronous integrate then read |
| Readout Type | Snapshot |
| Resolution | 640 × 512 |
| Sensor Cooling | Closed cycle rotary |
| Spectral Range | X6980 InSb, X6982 InSb: 1.5–5.0 µm X6981 InSb, X6983 InSb: 3.0–5.0 µm |
| Standard Video | HDMI, SDI |
| Subwindow Modes | Flexible windowing down to 32 × 4 (steps of 32 columns, 4 rows) |
| Video Modes | HD-SDI: 720p@50/59.9Hz, 1080p@25/29.97Hz; SD-SDI: 480i@60Hz, 576i@50Hz |
| Measurement & Analysis | |
|---|---|
| Accuracy | ≤100°C: ±2°C (±1°C typical), >100°C: ±2% of reading (±1% typical) |
| Ambient Drift Compensation [with factory cal] | Yes |
| Automatic Gain Control | Manual, Linear, Plateau equalization, ROI, DDE |
| Optional Temperature Range [with band matched optics] | ND1: 45°C–600°C (113°F–1112°F) ND2: 250°C–2000°C (482°F–3632°F) ND3: 500°C–3000°C (932°F–5432°F) |
| Standard Temperature Range [with band matched optics] | X6980 InSb, X6982 InSb: -20°C to 350°C (-4°F to 662°F) X6981 InSb, X6983 InSb: -20°C to 350°C (-4°F to 662°F), -10°C/14°F for microscopes |
| Communication & Data Storage | |
|---|---|
| Synchronization Modes | Sync In, Sync Out, Tri-Level Sync |
| Power | |
|---|---|
| Power | 24 VDC (<50 W steady state) |
| Environmental & Certifications | |
|---|---|
| Mounting | 2 × 1/4 in. -20 / 1 × 3/8 in. -16 / 4 × #10 -24 / Side: 3x 1/4 in. -20 (each side) |
| Operating Temperature Range | -20°C to 50°C (-4°F to 122°F) |
Accessories
- FLIR X-Camera Filter Wheel Holders
- 1x Microscope Protective Window - MWIR & LWIR (4206654-6)
- FLIR X-Camera Filter Wheel Removal Wrench (C1004.M202)
- FPO Bayonet Plug, 4-Tab FPO Bayonet (4142249)
- 3x Microscope Protective Window - MWIR ONLY (4219929)
- Extender Ring Set, 4 Rings 0.25", 0.50", 0.75", & 1.00", 4-Tab FPO Bayonet (4205079)
- FLIR Cooled Science X-Series + A-Series Camera Universal Lens Support (4210086)
- FLIR Cooled Science A-Series + X-Series Camera Power Connector (26399-000)
Resources & Support
Phone Support
International Line:
(+1) 805 392 3775
Local Number:
(+1) 844 283 5471
서비스, 수리 및 교정
아메리카
서비스 센터 연락처 |
전화 |
서비스, 수리 또는 보정 요청 |
이메일 보내기 |
|---|---|---|---|
| 미국 |
수신자 부담 전화: (+1) 866 477 3687 현지: +1 603 881 5200 |
||
| Canada | 800 613 0507 | RMA 제출 | |
| 남미 및 중미 | 0800 878 2486 | ||
유럽 |
|||
| 벨기에 | +32 (0)56 363 041 | ||
| 에스토니아 | +3726063976 | ||
| 독일 | +49 (0)69 95 00 900 | ||
| 이탈리아 | +390294753491 | ||
| 스웨덴 | +46 (0)8 753 25 00 | ||
| 아랍에미리트연합 | +971 4 802 4999 | ||
| 영국 | +44 (0)1732 220 011 | ||
아시아 태평양 |
|||
| 호주 | +44 (0)1732 220 011 | ||
| 중국 | +44 (0) 1245 453 414 | ||
| 인도 델리 | +91 11 47212002 | ||
| 인도 파리다바드 | +91 (129) 431-5031/32 | ||
| 일본 | 81-3-6721-6648 | ||
| 싱가포르 | +65 8787 0884 | ||
| 대한민국 | 2015년 2월 5일 | ||
Added to cart