FLIR TI SLT Interface
TrafiCam 3 and TrafiOne BPL Interface
The FLIR TI SLT BPL interface connects zone outputs from TrafiCam 3 and TrafiOne sensors to a controller. The TI SLT provides power and communications to the sensors at the same time. It also connects the PC to the connected sensors for system configuration and viewing.
仕様
| システム概要 | |
|---|---|
| エラー出力 | 4 × optical coupled dry contacts N/O via terminal connector on the back Imax = 50 m A, Umax = 48 V DC 1 interface error LED on the front 4× sensor status LEDs |
| 最大カメラ数 | Standard 1 – 8 sensors Maximum 8 × sensors |
| 通信 | |
|---|---|
| RJ11コネクター | 1 RJ45 Ethernet connector |
| コネクター | Via 4 × terminal connectors on the back |
| 出力 | 16 × optical coupled dry contacts N/C via terminal connector on the back
Imax = 50m A, Umax = 48 V DC Configurable ‘Close on Event’ or ‘Open on Event’ *Detection output status information via 16 output LEDS (green, front) |
| 電気設備 | |
|---|---|
| 入力電圧 | 12 – 42 V AC 12 – 48 V DC |
| 消費電力 | ≤130 mA at 24 V DC |
| 消費電流 | ≤130 mA at 24 V DC |
| 環境 | |
|---|---|
| ETSI|EMC | EMC 2014/30/EU, LVD 2014/35/EU, RoHS 2011/65/EU |
| 温度範囲 | -40°C to 74°C (-40°F to 165°F) |
| 機械設備 | |
|---|---|
| マウント | BOX, EURO-rack mountable, DIN-rail clickable |
| 寸法 | (H × W × D) 12.84 × 5.05 × 18.00 cm (5.06 × 1.99 × 7.09 in) |
| 重量 | 750 g (1.65 lb) |
Resources & Support
Datasheet
Flir TI SLT データシート
Datasheet
Flir TI SLT Datasheet
Export Restrictions
The information contained in this page pertains to products that may be subject to the International Traffic in Arms Regulations (ITAR) (22 C.F.R. Sections 120-130) or the Export Administration Regulations (EAR) (15 C.F.R. Sections 730-774) depending upon specifications for the final product; jurisdiction and classification will be provided upon request.