FLIR TI SLT Interface
TrafiCam 3 and TrafiOne BPL Interface
The FLIR TI SLT BPL interface connects zone outputs from TrafiCam 3 and TrafiOne sensors to a controller. The TI SLT provides power and communications to the sensors at the same time. It also connects the PC to the connected sensors for system configuration and viewing.
Especificaciones
| Descripción general del sistema | |
|---|---|
| Número máximo de cámaras | Standard 1 – 8 sensors Maximum 8 × sensors |
| Salida de error | 4 × optical coupled dry contacts N/O via terminal connector on the back Imax = 50 m A, Umax = 48 V DC 1 interface error LED on the front 4× sensor status LEDs |
| Comunicaciones | |
|---|---|
| Conector | Via 4 × terminal connectors on the back |
| Conector RJ11 | 1 RJ45 Ethernet connector |
| Salida | 16 × optical coupled dry contacts N/C via terminal connector on the back
Imax = 50m A, Umax = 48 V DC Configurable ‘Close on Event’ or ‘Open on Event’ *Detection output status information via 16 output LEDS (green, front) |
| Electricidad | |
|---|---|
| Consumo de corriente | ≤130 mA at 24 V DC |
| Consumo de energía | ≤130 mA at 24 V DC |
| Voltaje de entrada | 12 – 42 V AC 12 – 48 V DC |
| Características medioambientales | |
|---|---|
| EMC | EMC 2014/30/EU, LVD 2014/35/EU, RoHS 2011/65/EU |
| Rango de temperatura | -40°C to 74°C (-40°F to 165°F) |
| Mecánica | |
|---|---|
| Dimensiones | (H × W × D) 12.84 × 5.05 × 18.00 cm (5.06 × 1.99 × 7.09 in) |
| Peso | 750 g (1.65 lb) |
| Soporte | BOX, EURO-rack mountable, DIN-rail clickable |
Resources & Support
Datasheet
Ficha técnica FLIR TI SLT
Datasheet
Flir TI SLT Datasheet
Export Restrictions
The information contained in this page pertains to products that may be subject to the International Traffic in Arms Regulations (ITAR) (22 C.F.R. Sections 120-130) or the Export Administration Regulations (EAR) (15 C.F.R. Sections 730-774) depending upon specifications for the final product; jurisdiction and classification will be provided upon request.
Añadido al carro
Modelo: