Chat
Presione la burbuja de chat en la esquina inferior derecha para conectarse con nosotros al instante.
(Cuando haya agentes disponibles)
Discontinued
FLIR X6980 SLS™
Cámara para ciencia LWIR de alta velocidad
Product Variations
La FLIR X6980 SLS es una cámara de infrarrojos de onda larga extraordinariamente rápida diseñada para científicos e ingenieros que necesitan capturar imágenes de alta velocidad para un análisis térmico preciso y mediciones radiométricas personalizadas. Esta cámara termográfica combina una resolución de 640 × 512 del detector SLS con las velocidades de fotogramas de alta velocidad más rápidas para ofrecer las velocidades de instantánea más cortas y las bandas de temperatura más anchas necesarias para grabar imágenes de movimiento de parada nítidas de eventos de alta velocidad. Con una rueda de filtros motorizada de cuatro posiciones y soporte para lentes de enfoque motorizadas FLIR, la X6980 SLS proporcionará grabaciones de alta calidad, ahorrará tiempo y mitigará la frustración en entornos de adquisición dinámica.
Capture imágenes 640 × 512 a una frecuencia de hasta 1004 Hz con tiempos de integración 10 veces más cortos que las cámaras MWIR InSb (temperatura ambiente)
Guarde hasta 26 000 fotogramas de datos directamente en la memoria de la cámara o hasta 15 minutos en la SSD de 512 GB incluida
Transmita datos térmicos directamente a un ordenador para ver, registrar y analizar con FLIR Research Studio
Especificaciones
| Highlighted | |
|---|---|
| Resolution | 640 × 512 |
| Detector Pitch | 25 µm |
| Spectral Range | 7.5 µm (lower), 11.5–12.5 µm (upper) |
| Detector Type | Strained layer superlattice (SLS) |
| Camera f_number | FLIR X6981 SLS (7.5–12 µm), f/2.5: f/2.5 FLIR X6983 SLS (7.5–12 µm), f/4.1: f/4.1 |
| Dynamic Range | 14-bit |
| NETD | 40 mK typical |
| Frame Rate [Full Window] | Programmable: 0.0015 Hz to 1004 Hz |
| Integration Time | Programmable: 270 ns to ~full frame |
| Standard Temperature Range [with band matched optics] | -20°C to 350°C (-4°F to 662°F) |
| Optional Temperature Range [with band matched optics] | ND1: 250°C–1500°C (482°F–2732°F) ND2: 500°C–3000°C (932°F–5432°F) |
| Filtering | 4-Position motorized warm filter wheel, standard 1-inch filters, user swappable |
| Focus | Motorized (compatible w/manual) |
| Generación de imágenes y óptica | |
|---|---|
| Available Lenses | Manual (7.5–12 µm): 17 mm, 25 mm, 50 mm, 100 mm, 200 mm Motorized (7.5–12 µm): 17 mm, 25 mm, 50 mm, 100 mm, 200 mm |
| Camera f_number | FLIR X6981 SLS (7.5–12 µm), f/2.5: f/2.5 FLIR X6983 SLS (7.5–12 µm), f/4.1: f/4.1 |
| Close_up Lenses_Microscopes | 1x |
| Detector Pitch | 25 µm |
| Detector Type | Strained layer superlattice (SLS) |
| Digital Zoom | 1x, Auto (best fit) |
| Direct to SSD Recording | Yes, removable 512 GB SSD included |
| Download of On_Camera RAM, SSD Recordings | Transfer from SSD through GigE, CXP, or CL to Research Studio v2.1 or higher |
| Dynamic Range | 14-bit |
| Filtering | 4-Position motorized warm filter wheel, standard 1-inch filters, user swappable |
| Focus | Motorized (compatible w/manual) |
| Frame Rate [Full Window] | Programmable: 0.0015 Hz to 1004 Hz |
| Image Time Stamp | Internal IRIG-B decoder clock TSPI accurate time stamp |
| Integration Time | Programmable: 270 ns to ~full frame |
| Lens Interface | FLIR FPO-M (4-tab bayonet, motorized) |
| NETD | 40 mK typical |
| On Camera Image Storage | RAM (volatile): 16 GB, up to 26,000 frames full frame SSD (user-removable/non-volatile): ~15 minutes of ~800 Hz recording with included 512 GB SSD (more than 2 hours possible with 4 TB SSD purchased separately) |
| Operability | 99% typical |
| Overlay | Customizable (ability to toggle off) |
| Palette | Selectable 8-bit |
| Pixel Clock | 355 MHz |
| Radiometric Data Streaming | Simultaneous Gigabit Ethernet (GigE Vision), Camera Link,CoaXPress® 1.1, dual 5 Gb links |
| Readout Modes | Asynchronous integrate while read, Asynchronous integrate then read |
| Readout Type | Snapshot |
| Resolution | 640 × 512 |
| Sensor Cooling | Closed cycle rotary |
| Spectral Range | 7.5 µm (lower), 11.5–12.5 µm (upper) |
| Standard Video | HDMI, SDI |
| Subwindow Modes | Flexible windowing down to 32 × 4 (steps of 32 columns, 4 rows) |
| Video Modes | HD-SDI: 720p@50/59.9Hz, 1080p@25/29.97Hz; SD-SDI: 480i@60Hz, 576i@50Hz |
| Medición y análisis | |
|---|---|
| Accuracy | ≤100°C: ±2°C (±1°C typical), >100°C: ±2% of reading (±1% typical) |
| Ambient Drift Compensation [with factory cal] | Yes |
| Automatic Gain Control | Manual, Linear, Plateau equalization, ROI, DDE |
| Optional Temperature Range [with band matched optics] | ND1: 250°C–1500°C (482°F–2732°F) ND2: 500°C–3000°C (932°F–5432°F) |
| Standard Temperature Range [with band matched optics] | -20°C to 350°C (-4°F to 662°F) |
| Comunicación y almacenamiento de datos | |
|---|---|
| Synchronization Modes | Sync In, Sync Out, Tri-Level Sync |
| Alimentación | |
|---|---|
| Power | 24 VDC (<50 W steady state) |
| Características medioambientales y certificaciones | |
|---|---|
| Mounting | FLIR X6981 SLS (7.5–12 µm), f/2.5: 2 × 1/4 in. –20 / 1 × 3/8 in. –16 / 4 × #10 –24 / Side: 3x 1/4 in. –20 (each side) FLIR X6983 SLS (7.5–12 µm), f/4.1: 2 × 1/4 in. -20 / 1 × 3/8 in. -16 / 4 × #10 -24 / Side: 3x 1/4 in. -20 (each side) |
| Operating Temperature Range | -20°C to 50°C (-4°F to 122°F) |
Accessories
- FLIR X-Camera Filter Wheel Removal Wrench (C1004.M202)
- FLIR X-Camera Filter Wheel Holders
- 1x Microscope Protective Window - MWIR & LWIR (4206654-6)
- FLIR Cooled Science A-Series + X-Series Camera Power Connector (26399-000)
- Extender Ring Set, 4 Rings 0.25", 0.50", 0.75", & 1.00", 4-Tab FPO Bayonet (4205079)
- FPO Bayonet Plug, 4-Tab FPO Bayonet (4142249)
- FLIR Cooled Science X-Series + A-Series Camera Universal Lens Support (4210086)
Resources & Support
Datasheet
FLIR X6980 SLS Datasheet
Warranty
FLIR Solutions Cooled Camera Limited Warranty
Phone
International Line:
(+1) 805 392 3775
Local Numbers:
Belgium: (+32) 0800 70 586
France: (+33) 0800 906 893
Germany: (+49) 0699 675 8893
Spain: (+34) 900 838 919
United Kingdom: (+44) 0800 051 7865
Servicio, reparación y calibración
América
Contacto del centro de servicio |
Teléfono |
Solicitar servicio, reparación o calibración |
Envíenos un correo electrónico |
|---|---|---|---|
| Estados Unidos |
Línea gratuita: (+1) 866 477 3687 Local: (+1) 603 324 7600 |
||
| Canadá | 800 613 0507 | Enviar una RMA | |
| Sudamérica y Centroamérica | 0800 878 2486 | ||
Europa |
|||
| Bélgica | +32 (0)56 363 041 | ||
| Estonia | +3726063976 | ||
| Alemania | +49 (0) 69 95 00 900 | ||
| Italia | +390294753491 | ||
| Suecia | +46 (0) 8 753 26 54 | ||
| Emiratos Árabes Unidos: | +971 4 802 4999 | ||
| Reino Unido | +44 (0)1732 220 011 | ||
Asia y Pacífico |
|||
| Australia | +61 (0) 3 9550 2800 | ||
| China | +86 (0) 21-5169-7628 | ||
| India Delhi | +91 11 47212002 | ||
| India Faridabad | +91 (129) 431-5031/32 | ||
| Japón | 81-3-6721-6648 | ||
| Singapur | +65 8787 0884 | ||
| Corea del Sur | (02)565-2724 | ||