Benchtop Thermal Camera

FLIR A65sc Test Kit

Model: FLIR A65, f=13 mm with SC kit (7.5 Hz)
Go to Product Support
product image

The FLIR A65sc Benchtop Test Kit is the perfect choice for engineering and science labs where size constraints are critical. The uncooled VOx detector offers longwave imaging with thousands of temperature measurement points across your target, for more reliable and comprehensive results than with a thermocouple or spot pyrometer. Together with the kit’s lens choices and advanced analysis software, the A65sc kit is the most dependable temperature measurement solution for industrial and R&D labs.

Contact Sales
  • Eliminate Guesswork

    Instant non-contact measurements across 327,680 (640 x 512) thermal pixels helps eliminate the guesswork of finding hot spots.

  • Spot-On Detection

    With accuracy of ±5% and a thermal sensitivity/NETD of <50 mK, the A65sc offers spot-on detection of fine thermal variations.

  • Plug-and-Play

    GigE Vision and GenICam compliance means the A65sc is plug-and-play when used with IMAQ Vision or other software packages.

The Power of FLIR Benchtop Test Kits

The Power of FLIR Benchtop Test Kits

With the FLIR A65sc Benchtop Test Thermal Kit, you can detect thousands of measurement points in each thermal image and get reliable data in seconds. Together with the kit’s lens choices and advanced IR analysis software for use in Industrial and R&D labs, FLIR offers the most dependable thermal imaging solution, to help you better understand products and processes.

Contact Sales

Want more information on this product?

Call (866) 477-3687 to speak with a knowledgeable specialist.

Specifications
Overview
Accuracy
±5°C (±9°F) or ±5% of reading
Base Mounting
4 × M3 thread mounting holes (bottom)
Detector Type
Focal plane array (FPA), uncooled VOX microbolometer
Field of view (FOV)
45° × 37°
Focal Length
13 mm (0.5 in.)
Housing material
Magnesium and aluminum
IR Resolution
640 × 512 pixels
Object Temperature Range
-25°C to 135°C (-13 to 275°F) / –40°C to 550°C (-40 to 1022°F)
Packaging Size
370 x 180 x 320 mm (14.6 x 7.1 x 12.6 in.)
Thermal Sensitivity/NETD
<0.05°C @ 30°C (86°F) / 50 mK
Weight
0.200 kg (0.44 lb.)
FLIR Screen-EST Mode
No
Connections & Communications
Digital I/O connector type
12-pole M12 connector (shared with Digital Synchronization and External power)
Digital I/O isolation voltage
500 VRMS
Digital I/O supply voltage
2–40 VDC, max 200 mA
Digital input purpose
General Purpose
Digital Inputs
1× opto-isolated, "0" <1.2 VDC, "1" = 2–25 VDC.
Digital Output Purpose
General purpose output to ext. device (programmatically set)
Digital Outputs
1× opto-isolated, 2–40 VDC, max 185 mA
Digital Synchronization Connector Type
12-pole M12 connector (shared with Digital I/O and External power)
Ethernet
Control and image
Ethernet Communication
GigE Vision ver. 1.2 Client API GenICam compliant
Ethernet Connector Type
RJ-45
Ethernet Image Streaming
8-bit monochrome @ 60 Hz Signal linear/ DDE Automatic/ Manual Flip H&V 14-bit 320 × 256 pixels @ 60 Hz Signal linear/ DDE Temperature linear GigE Vision and GenICam compatible
Ethernet Power
Power over Ethernet, PoE IEEE 802.3af class 0 Power
Ethernet Protocols
TCP, UDP, ICMP, IGMP, DHCP, GigEVision
Ethernet Standard
IEEE 802.3
Ethernet Type
Gigabit Ethernet
Synchronization in
1×, non-isolated
Synchronization in - purpose
Frame synchronization in to control camera
Synchronization in - type
LVC Buffer @3.3V, "0" <0.8 V, "1" >2.0 V.
Synchronization out
1×, non-isolated
Synchronization out - purpose
Frame sync out to control another Ax5 camera
Synchronization Out - type
LVC Buffer @ 3.3V, "0"=24 MA max, "1"= –24 mA max.
Environmental
Atmospheric transmission correction
Automatic, based on inputs for distance, atmospheric temperature and relative humidity
EMC
EN 61000-6-2 (Immunity) EN 61000-6-3 (Emission) FCC 47 CFR Part 15 Class B (Emission)
Emissivity Correction
Variable from 0.5 to 1.0
Encapsulation
IP 40 (IEC 60529) with base support mounted
Humidity (Operating and Storage)
IEC 60068-2-30/24 h 95% relative humidity 25°C to 40°C (77°F to 104°F)
Operating Temperature Range
–15°C to 50°C (5°F to 122°F) The operating temperature range assumes that the camera is mounted on the base support (included in the package) or a similar type of heatsink.
Shock
25 g (IEC 60068-2-27)
Storage Temperature Range
–40°C to 70°C (–40°F to 158°F)
Tripod Mounting
UNC ¼"-20 (on three sides)
Vibration
2 g (IEC 60068-2-6 & MIL-STD810G)
Imaging & Optical
Detector Pitch
17 µm
Detector Time Constant
Typical 12 ms
f-number
1.25
Focus
Fixed
Image Frequency
7.5 Hz
Spatial resolution (IFOV)
1.31 mrad
Spectral Range
7.5–13 µm
Measurement & Analysis
External Optics & Windows Correction
Automatic, based on input of optics/window transmission and temperature
Measurement Corrections
Global object parameters
Optics Transmission Correction
Automatic, based on signals from internal sensors
Reflected apparent temperature correction
Automatic, based on input of reflected temperature
Meter Data
Camera size (L x W x H)
106 × 40 × 43 mm (4.2 × 1.6 × 1.7 in.)
Power
External Power Connector Type
12-pole M12 connector (shared with Digital I/O and Digital Synchronization )
External Power Operation
12/24 VDC, < 3.5 W nominal < 6.0 W absolute max
Voltage
Allowed range 10–30 VDC
Find a Dealer

Find a Dealer

Ready to buy? See our list of dealers.

Export Restrictions

Export Restrictions

The information contained in this page pertains to a dual use product controlled for export by the Export Administration Regulations (EAR). Diversion contrary to US law is prohibited. US Department of Commerce authorization is not required prior to export or transfer to foreign persons or parties unless otherwise prohibited.

FLIR A65sc Test Kit - Model: FLIR A65, f=13 mm with SC kit (7.5 Hz)

Change Selection