Dual-Vision Camera for Automatic Incident & Fire Detection

ITS-Series Dual AID

Model: ITS-669 Dual AID 316L, 640 x 480, 69° FOV
Support Page (temporary link)
product image

FLIR ITS-Series Dual AID cameras combine best-in-class thermal and visual imaging technology with advanced video analytics to provide a complete solution for automatic incident detection, data collection and early fire detection. FLIR's traffic video analytics have proven their effectiveness worldwide along highways and in tunnels and are now combined with the power of thermal imaging that allows traffic operators to see clearly in total darkness, in bad weather and over a long range.

  • Dual Thermal / Visible Cameras

    The ITS-Series Dual AID is equipped with both thermal and daylight/low light cameras with a motorized optical zoom.

  • Automatic Incident Detection

    The camera supports traffic operators with alerts on stopped vehicles, wrong-way drivers, pedestrians, lost cargo, traffic flow data and more.

  • See Through Smoke

    Thermal cameras can penetrate smoke in case of fire. This enhanced visibility guides emergency personnel to locate victims inside tunnels.

Specifications
Overview
Detector Type
Focal Plane Array (FPA), uncooled Vanadium Oxide Microbolometer
Dimensions
Housing only: 71 x 130 x 300 mm With bracket: 201 x 134 x 408 mm
Housing material
Stainless steel 316L
Mounting
Wall, pole, ceiling mount
Spectral Range
7.5 to 13.5 µm
Analytics
Automatic Incident Detection
Traffic events: Stopped vehicle, speed drop, levels of service, overspeed, wrong-way drivers, traffic congestion, underspeed Non-traffic events: Smoke in tunnel, pedestrian, fallen object Technical alarms: Image quality, camera tampering
Fire Detection
Early fire detection in tunnels
Connections & Communications
Interface
10/100 Mbps Ethernet (RJ-45), internal SFP slot optiona
Supported Protocols
IPv4/v6, TCP/IP, UDP, RTP, RTSP, HTTP, HTTPS, ICMP, FTP, SMTP, DHCP, PPPoE, UPnP, IGMP, SNMPv1/2/3, QoS, ONVIF, 802.1X
Video Over Ethernet
Two independent channels for each camera (4 total) of streaming H.264 or M-JPEG
API
ONVIF Profile S
Electrical & Mechanical
Consumption
12 W heater off, 24 W heater on
Cable Glands
2xM20 or IP67 network and power connector
Environmental
Ingress Protection
IP66 / IP67
Environmental & Approvals
Operating Temperature Range
–10° to 50°C (–14° to 122°F)
Relative Humidity
0% to 100%, no condensation
Imaging & Optical
Image Fequency
NTSC: 30 Hz PAL: 25 Hz
Image Processing
Automatic Gain Control (AGC), Digital Detail Enhancement (DDE)
Image Sensor
1/3" Sony CMOS sensor
Streaming Resolution
Visual: up to 1920 x 1080 @ 30 Hz Thermal: up to 640 x 480 @ 30 Hz
Resolution - Visual
Max: 1920 x 1080
Other
Traffic Data Collection
Traffic flow data per lane: Traffic flow speed, zone occupancy Integrated vehicle traffic data: Average speed per vehicle class per lane (headway, gap time per length, class per lane), occupancy Individual vehicle traffic data: Speed, gap time, headway, vehicle classification
Power
Power Options
230 Vac, 24Vac or dc, PoE camera only, PoE+ for camera & heater
Thermal Imaging
Focal Length - Thermal
9 mm
Resolution - Thermal
640 x 480
Visible Camera
Optical Zoom - Visible
10x

ITS-Series Dual AID - Model: ITS-669 Dual AID 316L, 640 x 480, 69° FOV

Change Selection