;
FLIR A8300sc
Support Center

FLIR A8300sc

Go to Product Details Page

For Support
Please call 1-800-GO-INFRA (464-6372) or 1-603-324-7600 or click here for support

For Service
Call 1-866-354-7911 or Submit RMA

Overview:
Technical Guidance

How can I connect my FLIR Ethernet camera to FLIR Tools?

Read the Story
Warranty & RMA

FLIR Standard Warranty

Learn more
Instructions

Does FLIR offer an SDK to control and get video stream from the FLIR IR cameras?

Learn more
Technical Guidance

Are cameras such as the X6900SC / X6800SC / X8500SC fully GeniCam compliantl?Are there any restrictions (maximum framerate, superframing, preset sequencing) in doing so, or is it full control?

Learn more
Compatibility

What cameras are compatible with the BHP SDK?

Read the Story
Specifications
Overview
Detector Type
FLIR indium antimonide (InSb)
Dynamic Range
14-bit
Mounting
2 x 1/4"–20, 1 x 3/8"–16, 4 x 10/24
Power
24 VDC (<50 W steady state)
Size [L x W x H ] w/o Lens
8.9 x 4.6 x 5.3 in (226 x 117 x 135 mm)
Spectral Range
3.0 – 5.0 µm
Weight [without lens]
8.2 lbs (3.73 kg)
Well Capacity
5.9 M electrons
Zoom
Video Zoom is Auto Selected; Full Res = 1x, 1/4 Res = 2x
Connections & Communications
Analog Video
NA
Synchronization Modes
Sync In, Sync Out
Environmental
Operating Temperature Range
-40°C to 50°C (-40°F to 122°F )
Optional Temperature Range
Up to 1,500°C (2,732°F) Up to 2,000°C (3,632°F)
Standard Temperature Range
-20°C to 350°C (-4°F to 662°F)
Storage Temperature Range
-55°C to 80°C (-67°F to 176°F )
Imaging & Optical
AGC
Linear, PE, DDE
Available Lenses
17 mm, 25 mm, 50 mm, 100 mm
Camera Control
GenICam
Camera f-number
f/4.0
Close-up Lenses/Microscopes
1x, 4x
Detector Pitch
14 µm
Digital Data Protocol
Gigabit Ethernet (GigE Vision 2.0), USB3 (USB3 Vision), CoaXPress
Filtering
Behind the Lens
Focus
Manual
Frame Rate [Full Window]
60 Hz
HD Video
HD-SDI
Max Frame Rate
60 Hz @ Full Window
Minimum Integration Time
500 ns
Operability
>99.5% (99.9% typical)
Palette
Selectable 8-bit
Readout
Snapshot
Readout Modes
Asynchronous Integrate While Read; Asynchronous Integrate Then Read
Resolution
1280 x 720
Sensor Cooling
Closed Cycle Linear
Subwindow Modes
Flexible (FPA centered)
Command and Control
GenICam
Measurement & Analysis
Accuracy
±2°C or ±2% of reading Valid for 0°C to 3000°C on standard lens & filter configurations only ±1°C or ±1% of reading optional upgrade
NETD
<25 mK* *Measured at 25°C, mid-well, with lens
Thermal Imaging
Detector Resolution
1280 x 720
Training:
Learn More