High Performance MWIR InSb Camera

FLIR A6750 MWIR

Model: A6750 MWIR
Go to Product Support
product image

The FLIR A6750 MWIR camera offers short exposure times and high-speed windowed frame rates, making it an ideal choice for recording rapid thermal events and fast-moving targets. Freeze motion or achieve accurate temperature measurements on moving subjects, and perform a variety of non-destructive testing with this cooled InSb camera. The 327,680 (640 x 512) pixel IR resolution and high sensitivity produce crisp imagery, well suited to electronics inspections, scientific research, and more.

Contact Sales
  • Crisp Thermal Images

    FLIR A6750 operates in the 3.0–5.0 µm waveband (1.0–5.0 µm broadband option) and produces finely-detailed 327,680 pixel images.

  • HIGH SPEED IMAGE RECORDING

    A6750 captures at full resolution with full frame rates of 125 Hz

  • Standard Video Interfaces

    Gigabit Ethernet and analog video are simultaneously active yet independently controlled allowing greater flexibility for recording and display purposes.

Connectivity and Compatibility

Connectivity and Compatibility

The FLIR A6750 is plug-and-play with third-party software, and works seamlessly with FLIR ResearchIR for intuitive viewing, recording, and advanced processing of thermal data. Use the optional SDK for integration into your own custom software program.

Contact Sales

Want more information on this product?

Call (866) 477-3687 to speak with a knowledgeable specialist.

Specifications
Overview
Accuracy
≤100°C (≤212°F) ±2°C (±3.6°F) accuracy (±1°C/1.8°F typical), >100°C ±2% of reading (±1% typical)
Detector Type
FLIR indium antimonide (InSb)
Dynamic Range
14-bit
Integration Time
480 ns to ~full frame
Optional Temperature Range [with band matched optics]
45°C to 600°C/113°F to 1112°F (ND1); 250°C to 2000°C/482°F to 3632°F (ND2); 500°C to 3000°C/932°F to 5432°F (ND3)
Pixel Size [Square]
15 µm
Resolution
640 × 512
Size [L x W x H ] w/o Lens
226 × 102 × 109 mm (8.9 × 4.0 × 4.3 in.)
Standard Temperature Range [with band matched optics]
-20°C to 300°C (-4°F to 572°F)
Weight [without lens]
2.3 kg (5 lbs)
App
Palette
Selectable 8-bit
Connections & Communications
Command and Control
GenICam (GigE), RS-232
Synchronization Modes
Sync In, Sync Out
Environmental
Mounting
2 × ¼" -20 tapped holes, 1 × 3/8"-16 tapped hole, 4 × 10-24 tapped holes
Operating Temperature Range
-20°C to 50°C (-4°F to 122°F)
Imaging & Optical
Available Lenses
25 mm, 50 mm, 100 mm
Camera f-number
f/2.5
Close-up Lenses/Microscopes
No microscopes available
Filter Holder [Warm]
Behind lens mount for standard 1 inch diameter filters
Focus
Manual
Frame Rate [Full Window]
Programmable; 0.0015 Hz to 125 Hz
Image Time Stamp
Yes
Lens Interface
FLIR FPO (4-tab bayonet)
On Camera Image Storage
None
Operability
≥99.8% (≥99.95% typical)
Overlay
Fixed configuration, can be turned off
Pixel Clock
50 MHz
Radiometric Data Streaming
Gigabit Ethernet (GigE Vision)
Readout Modes
Asynchronous integrate while read, asynchronous integrate then read
Readout Type
Snapshot
Sensor Cooling
Closed-cycle rotary
Spectral Range
1.0 – 5.0 µm
Standard Video
SDI
Standard Video Zoom
Automatic, variable
Subwindow Modes
Flexible windowing down to 16 × 4 (steps of 16 columns, 4 rows)
Video Modes
SDI: 720p@50/59.9, 1080p@25/29.9
Measurement & Analysis
Ambient Drift Compensation [with factory cal]
Yes
Automatic Gain Control
Manual, Linear, Plateau equalization, DDE
Other
Thermal Sensitivity_NETD [typical]
≤25 mK
Power
Power
24 VDC (<24 W steady state)
Export Restrictions

Export Restrictions

The information contained in this page pertains to a dual use product controlled for export by the Export Administration Regulations (EAR). Diversion contrary to US law is prohibited. US Department of Commerce authorization is not required prior to export or transfer to foreign persons or parties unless otherwise prohibited.

FLIR A6750 MWIR - Model: A6750 MWIR

Change Selection