High-Performance TX2 Carrier Board for Embedded Vision

Quartet Embedded Solutions for TX2

Model: Quartet Carrier with TX2 Module 4GB
Go to Product Support
product image

Quartet Carrier Board for TX2 enables easy integration of up to 4 x USB3 machine vision cameras at full bandwidth. The Nvidia Jetson deep learning hardware accelerator allows for a complete decision making system on a single compact board. This custom carrier board provides a fully integrated SOM design which optimizes size and cost by eliminating the need for peripheral hardware and host systems.

  • TURNKEY Solution: Run up to 4 cameras simultaneously

    With its 4x USB3 TF38 connectors, the NVIDIA Jetson TX2 module and pre-integrated Spinnaker SDK, the Quartet enables integration of up to four machine vision cameras simultaneously running in a single system.

  • REDUCE SYSTEM FOOTPRINT

    Fully integrated SOM design eliminating the need for peripheral hardware and host systems. It combines power and data transmission over a single cable for a remarkably compact footprint, allowing integrators to easily integrate a powerful single board computer (SBC) into space constrained vision systems.

  • POWERFUL AND FLEXIBLE HARDWARE

    Three system options available depending on your needs. Two options with the module pre-installed with the FLIR Spinnaker SDK, enabling plug and play compatibility with FLIR Blackfly S USB3 board level cameras. Or the option to buy only the carrier board and build your own system.

Specifications
General
Memory
4 GB 128-bit LPDDR4 51.2 GB/s
Overview
CPU
Dual-Core NVIDIA Denver 1.5 64-Bit CPU and Quad-Core ARM®┬áCortex®-A57 MPCore processor
Display
HDMI Type A x 1
GPU
256-core NVIDIA Pascal™ GPU architecture with 256 NVIDIA CUDA cores
Environmental & Approvals
Storage
32 GB eMMC 5.1
Other
Expansion
SATA connector x1
Fan connector x1
Physical
Dimensions
138mm × 92mm × 18.2mm
Mass
182g
Operating Temperature
-4°F — 140°F (-20°C — 60°C)* w/0.5 m/s air-flow
Part Number
ACC-01-6004
Storage Humidity
5 — 95% @ 40°C, non-condensing
Storage Temperature
-40°F — 158°F (-40°C — 70°C)
Power
Input Power
10~24Vdc with 2-pin terminal block
Input_Output
USB 3.0 x 4 (TF-38)
USB 2.0 type A x 1
USB 3.0 type A x 1
Power switch x 1 with LED
Micro SD slot x 1
OTG x 1
Module Power
7.5W / 15W
Recommended System Configuration
Operating System
Arch Linux

Quartet Embedded Solutions for TX2 - Model: Quartet Carrier with TX2 Module 4GB

Change Selection