FLIR A65
Support Center

FLIR A65

Go to Product Details Page

For Support
Please submit a ticket.

For Service
Call 1-866-354-7911 or submit RMA.

Overview:
Instructions

How can I setup my FLIR Ax5 camera to skip a certain amount of frames?

Learn more
Instructions

Clarification of the FLIR Ax5 camera pixel formats.

Learn more
Instructions

VLC Media Player - Display and Record

Learn more
Technical Guidance

How can I stream video from my USB or Ethernet camera?

Learn more
Configuration

How do I configure my camera to stream a temperature linear signal?

Learn more
Technical Guidance

How much bandwidth do the FLIR A615/A655sc and FLIR A35/A65 use?

Read the Story
Configuration

What are the NUC settings for the FLIR Ax5?

Read the Story
Technical Guidance

How can I display live video from my USB or Ethernet camera?

Learn more
Instructions

Setting the FLIR A35 / A65 to acquire on image when the GPI signal is asserted.

Read the Story
Instructions

Does FLIR offer an SDK to control and get video stream from the FLIR IR cameras?

Learn more
Technical Guidance

How do I manually control the NUC (auto-calibration) in the FLIR A35 and A65?

Learn more
Technical Guidance

How can I connect my FLIR Ethernet camera to FLIR Tools?

Read the Story
Resources:
Automation Catalog
Download
FLIR A35/A65 Datasheet
Download
Specifications
Overview
Base Mounting
4 × M3 thread mounting holes (bottom)
Detector Type
Focal plane array (FPA), uncooled VOX microbolometer
Housing material
Magnesium and aluminum
IR Resolution
640 × 512 pixels
Spectral Range
7.5–13 µm
Tripod Mounting
UNC ¼"-20 (on three sides)
Connections & Communications
Digital I/O connector type
12-pole M12 connector (shared with Digital Synchronization and External power)
Digital I/O isolation voltage
500 VRMS
Digital I/O supply voltage
2–40 VDC, max 200 mA
Digital input purpose
General Purpose
Digital Inputs
1× opto-isolated, "0" <1.2 VDC, "1" = 2–25 VDC.
Digital Output Purpose
General purpose output to ext. device (programmatically set)
Digital Outputs
1× opto-isolated, 2–40 VDC, max 185 mA
Digital Synchronization Connector Type
12-pole M12 connector (shared with Digital I/O and External power)
Ethernet
Control and image
Ethernet Communication
GigE Vision ver. 1.2 Client API GenICam compliant
Ethernet Connector Type
RJ-45
Ethernet Image Streaming
8-bit monochrome @ 60 Hz Signal linear/ DDE Automatic/ Manual Flip H&V 14-bit 320 × 256 pixels @ 60 Hz Signal linear/ DDE Temperature linear GigE Vision and GenICam compatible
Ethernet Power
Power over Ethernet, PoE IEEE 802.3af class 0 Power
Ethernet Protocols
TCP, UDP, ICMP, IGMP, DHCP, GigEVision
Ethernet Type
Gigabit Ethernet
Synchronization in
1×, non-isolated
Synchronization in - type
LVC Buffer @3.3V, "0" <0.8 V, "1" >2.0 V.
Synchronization out
1×, non-isolated
Synchronization out - purpose
Frame sync out to control another Ax5 camera
Synchronization Out - type
LVC Buffer @ 3.3V, "0"=24 MA max, "1"= –24 mA max.
Environmental
Atmospheric transmission correction
Automatic, based on inputs for distance, atmospheric temperature and relative humidity
EMC
EN 61000-6-2 (Immunity) EN 61000-6-3 (Emission) FCC 47 CFR Part 15 Class B (Emission)
Emissivity Correction
Variable from 0.5 to 1.0
Encapsulation
IP 40 (IEC 60529) with base support mounted
Humidity (Operating and Storage)
IEC 60068-2-30/24 h 95% relative humidity 25°C to 40°C (77°F to 104°F)
Operating Temperature Range
–15°C to 50°C (5°F to 122°F) The operating temperature range assumes that the camera is mounted on the base support (included in the package) or a similar type of heatsink.
Shock
25 g (IEC 60068-2-27)
Storage Temperature Range
–40°C to 70°C (–40°F to 158°F)
Vibration
2 g (IEC 60068-2-6 & MIL-STD810G)
Imaging & Optical
Detector Pitch
17 µm
Detector Time Constant
Typical 12 ms
f-number
1.25
Focus
Fixed
Measurement & Analysis
Accuracy
±5°C (±9°F) or ±5% of reading
External Optics & Windows Correction
Automatic, based on input of optics/window transmission and temperature
Measurement Corrections
Global object parameters
Object Temperature Range
-25°C to 135°C (-13 to 275°F) / –40°C to 550°C (-40 to 1022°F)
Optics Transmission Correction
Automatic, based on signals from internal sensors
Reflected apparent temperature correction
Automatic, based on input of reflected temperature
Thermal Sensitivity/NETD
< 0.05°C @ 30°C (86°F) / 50 mK
Power
External Power Connector Type
12-pole M12 connector (shared with Digital I/O and Digital Synchronization )
External Power Operation
12/24 VDC, < 3.5 W nominal < 6.0 W absolute max
Voltage
Allowed range 10–30 VDC